The CT's plugged into the device are simply regular audio cables. The CT's can be extended using normal audio extension cables (mono or stereo will work fine). 3.5mm extensions for the 200A CT's, 2.5mm extensions for the 50A CT's. We generally recommend keeping the sensor extensions < 20 feet since signal strength can degrade over long distances and cause measurement inaccuracy. If you need to monitor circuits > 20 feet away or so, this generally would require a separate Gen 2 at that location to capture circuit usage there.

Feedback and Suggestions

This knowledge base is pretty new for the Emporia team. Our goal is to provide all of the information we can to help you manage your energy in better ways. If this article wasn't helpful, or we could be more clarifying on any points please reach out to the Customer Support team and we'll certainly work to improve these guides.