Skip to main content
Updated over a week ago

Load Management is built to be flexible for your specific installation scenario. Here's a list of the available settings from within the app to help control the EV Charger and Load Management functionality to best suit your needs:

Enabled - A Toggle switch for whether or not the EV Charger should be managed by Load Management. In the vast majority of situations requiring Load Management, this toggle should be left on at all times.
​Energy Monitor - Used to select which Vue: Gen 2 / Vue: Gen 3 is tracking your system usage. Labeled as "Example Gen 2" in screenshots.
​Service Rating - The amperage of your feeder (mains) or service limit for the system where Load Management is enabled. Typically this will be the size of your main breaker (100A, 150A, 200A or similar).
​Available Current - The available amperage available within the service panel prior to installing the EV Charger. Load Management will allow the EV Charger to consume this much current (amperage) regardless of measurements detected by the Energy Monitor.

Screenshot 2023-10-09 154434.png

Once Load Management has been enabled for your EV Charger - It will be indicated on the Control page as can be seen here:

Screenshot 2023-10-09 154226.png

Feedback and Suggestions

This knowledge base is pretty new for the Emporia team. Our goal is to provide all of the information we can to help you manage your energy in better ways. If this article wasn't helpful, or we could be more clarifying on any points please reach out to the Customer Support team and we'll certainly work to improve these guides.

Did this answer your question?