All EV Chargers with PowerSmart functionality must be onboarded using the Emporia app. This includes both new EV Chargers and existing chargers that have been upgraded to include PowerSmart. Since PowerSmart-enabled chargers have distinct settings and firmware, onboarding is required to ensure proper setup and functionality.
Ideally you'll want to have installed your Vue energy monitor prior to the onboarding process of your EV Charger as part of the PowerSmart setup. Since PowerSmart requires an operating energy monitor to function correctly, you can't enable or configure PowerSmart until you have a connected energy monitor available in the Emporia Energy app. Settings and configuration can always be updated in the future - but for the most streamlined approach the energy monitor is a good first step.
Steps to Onboard Your EV Charger with PowerSmart
Open the Emporia app and navigate to:
Menu >> Manage Devices >> Add a Device
Then, select Electric Vehicle Chargers from the list at the top.
Connect the EV Charger to your local Wi-Fi network following the app prompts.
Once the EV Charger is connected, you will be directed to the “Secure Settings” page, where you can enable PowerSmart.
Important! Ensure that your Emporia Vue Energy Monitor is already installed, as you’ll need to link the EV Charger with the assigned energy monitor during this step.
Note: If you don't see the PowerSmart options/settings as part of the onboarding flow, please reach out to Customer Support
After enabling PowerSmart, you can adjust its settings according to your energy management preferences.
Feedback and Suggestions
At Emporia, we are dedicated to providing clear and comprehensive resources to help you optimize your energy management. If you find this article unclear or have suggestions for improvement, please contact our Customer Support team. We are always striving to enhance our guides and better support your experience.