The Emporia Energy app has two options for your Vue: Reset Network (reconnect to a new Wi-Fi network) and Recalibrate Device (recalibrate your sensors, including for solar or generation). The right one depends on what you’re trying to do.
Quick Guide: What Are You Trying to Do?
Reconnecting to Wi-Fi (new router, new password, moved the Vue) → see Reset Network (Wi-Fi Only)
Recently changed your wire harness or sensor setup (added solar, swapped a phase, added or moved sensors) → see Recalibrate Device
Just installed your Vue → you don't need this article. Use the standard install flow in the app.
Vue is offline or won't reconnect → start with Vue Not Connecting: Bluetooth and Wi-Fi Troubleshooting first. Reset is rarely the right first step for connection issues.
Reset Network (Wi-Fi Only)
Use this when your Vue is already calibrated correctly and you just need to point it at a different network or refresh its connection.
Before continuing with the steps below, ensure you are near the device and have your Wi-Fi password ready.
Open the Emporia Energy app and tap the Menu (☰).
Tap Manage Devices and select your Vue monitor.
Tap Reset Network.
Follow the prompts to enter your new Wi-Fi network and password.
Once the reset completes, the Vue reconnects to Wi-Fi and resumes reporting to the cloud, typically within a minute. Your circuit configuration, multipliers, names, and history are preserved. Only the network connection is changed.
Recalibrate Device — with Solar or Generation
Use this when your home has solar panels, a battery, or other generation sources, and you've made a hardware change (added solar, moved a sensor, changed the wire harness) that the Vue needs to learn about.
Important — before you start:
Turn off your solar / generation source during the recalibration. Cover the panels, flip the solar disconnect, or run the reset after dark. The Vue assumes any current it sees during calibration is grid-supplied — if solar is generating, it will calibrate against the wrong baseline and your readings will be inaccurate.
Run real consumption during the reset. Aim for at least 1 kW per live phase (HVAC, water heater, dryer, oven). The more current the Vue can measure during calibration, the more accurately it locks onto your phase voltages.
Steps:
Open the Emporia Energy app and tap the Menu (☰).
Tap Manage Devices and select your Vue.
Tap Recalibrate Device. You can do this remotely, so you don’t need to be near the Vue, as long as you are consuming from the grid during the recalibration.
When asked “Does your system generate its own energy?”, select Yes.
The system will then begin to verify your setup, and let you know once it's complete.
Hit Continue and you're ready to go!
How to confirm the recalibration worked: after the reset completes, open the Home screen. You should see Net Production or Net Usage at the top of the circuit list, and it should swap between the two as your generation and consumption shift. Generation appears as green/negative numbers; consumption as blue/positive numbers. If you only see "Total Usage" at the top with no Net values, the Vue is still set as no-solar and you’ll need to run Recalibrate Device again and select Yes.
Recalibration tunes the Vue to your home's specific energy profile, including bi-directional flow on solar and generation circuits. Skipping it after a hardware change can leave your readings inaccurate.
Recalibrate Device — No Solar or Generation
Use this when your home has no solar, battery, or generation sources, and you've made a hardware change the Vue needs to learn about.
This can be done completely remotely. However, ensure there's a good amount of consumption during recalibration, at least 5A.
Steps:
Open the Emporia Energy app and tap the Menu (☰).
Tap Manage Devices and select your Vue.
Tap Recalibrate Device. You can do this remotely, but need a good amount of consumption during this process for proper results.
When asked “Does your system generate its own energy?”, select No.
The system will then begin to verify your setup, and let you know once it's complete.
Hit Continue and you're ready to go!
The Vue calibrates for one-way (consumption-only) measurement, optimized for grid-only homes.
Choosing the Right Option — A Quick Reference
Reset Network: only changes the Wi-Fi connection and preserves your existing calibration. Right choice for Wi-Fi-only changes. You need to be near the Vue.
Recalibrate Device, then Yes: enables bi-directional measurement. Right choice for any home with solar, batteries, or another generation source, especially after a hardware change.
Recalibrate Device, then No: one-way consumption measurement. Right choice for grid-only homes after a hardware change.
Picking the wrong option won’t damage anything. You can always run Recalibrate Device again and change your answer. But making the right choice the first time avoids inaccurate readings in the meantime.
After the Reset and Recalibration
Give the device a few minutes for readings to settle before evaluating accuracy.
Your circuit list, names, multipliers, and Bi-Directional settings are preserved across resets.
Historical data is not deleted by a reset.
If the Reset or Recalibration Doesn't Work
Wi-Fi won't reconnect — confirm the Vue is on a 2.4 GHz network (not 5 GHz), check signal strength at the panel, and see Vue Not Connecting: Bluetooth and Wi-Fi Troubleshooting.
App can't find the Vue during Network (Wi-Fi) reset — make sure Bluetooth is enabled on your phone and you're standing within a few feet of the Vue when starting the reset flow.
Recalibration fails or readings look wrong — verify your wire harness wiring matches your system type and that each 200A CT is on a separate phase. See Hardware and Wire Harness Installation.
Recalibration shows an error. The Vue needs a good amount of consumption to recalibrate, and usage below 5A can cause error messages. To fix this:
Turn on larger loads such as an oven, dryer, water heater, or HVAC.
If you have solar or generation, keep it off and make sure you’re pulling power from the grid (not exporting or at net zero).
Tap Recalibrate Device again and answer the generation question.
If the issue persists, please contact our Customer Support team — we're happy to help.
Feedback and Suggestions
This knowledge base is continuously updated to provide the most helpful guidance for Emporia customers. If you found this article unclear or have suggestions for improvement, please contact our Customer Support team.
