Skip to main content

PowerSmart Settings and Configuration

Learn how to set up and configure PowerSmart for your Emporia EV Chargers to manage panel load and charging rate safely.

PowerSmart dynamically adjusts your EV Charger's charging rate to prevent panel overloading by monitoring system usage with an Emporia Energy Monitor. This allows the installation of a 48A EV Charger without electrical service panel upgrades. PowerSmart can manage single or multiple EV Chargers simultaneously.
​

Pre-requisites for PowerSmart Setup

Before proceeding to set up PowerSmart, ensure the following:

  • Obtain PowerSmart software for your charger. PowerSmart comes pre-installed on Emporia Pro Level 2 EV Chargers. For Emporia Classic Level 2 EV Chargers, a paid software upgrade is required:

    • Energy Monitor + Software Upgrade (for Classic EV Charger owners): $200

    • Software Upgrade Only (for existing energy monitor and EV charger owners): $125

  • Install the Vue Energy Monitor (Vue 2 or Vue 3) to monitor the electrical panel that your EV charging could overload

  • Confirm the Service Rating of that panel to ensure PowerSmart can manage the maximum current (the size of its main breaker, e.g., 100A, 150A, 200A)

Homes requirement: all devices in a PowerSmart setup must be in the same Home, or all Unassigned. The app will not let you move a device to a different Home if the move would split the setup. To move it, first disable PowerSmart or remove the device from it, or move the monitor and all of its controlled chargers to the same Home together. See Understanding Homes in the Emporia App.

Configuration Settings

To find and set up PowerSmart settings: Open the Emporia Energy app and tap Discover at the bottom of the screen. Select PowerSmart, then select your Vue energy monitor. You’ll then enter your Service Rating and Minimum Guaranteed Charge Rate. Have the 4-digit PIN you set during onboarding (during the breaker size step) ready to save these settings.

  • Enabled: Toggle to activate/deactivate PowerSmart. Recommended to keep enabled when PowerSmart is required

  • Energy Monitor: Select your Vue 2 or Vue 3 device to monitor your system's energy consumption

  • Service Rating: The amperage rating of the electrical panel that your EV charging could overload, which is the size of that particular panel’s main breaker (e.g., 100A, 150A, 200A)

  • Minimum Guaranteed Charge Rate: The amperage your panel can still spare for EV charging when your home is at its highest possible usage, with every appliance running at once, as determined by a licensed electrician. This is not based on your breaker size. This sets the lowest charge rate your charger will offer your vehicle. PowerSmart adjusts the charge rate between your charger’s max charge rate (set with your breaker size during onboarding) and this minimum to prevent overloading. It’s also the rate your charger drops to if PowerSmart becomes unavailable, such as when real-time monitoring is lost

    • Enter the amperage your electrician determined is available. If an electrician isn’t available, set it to 6A for safety, since a higher value could risk overloading your panel

PowerSmart for Multiple Chargers

When managing multiple EV Chargers, PowerSmart requires additional configuration:

  • Minimum Guaranteed Charge Rate: The total amperage your panel can still spare for all EV charging when your home is at its highest possible usage, as determined by a licensed electrician. PowerSmart distributes it among active chargers.

    • Enter the amperage your electrician determined is available. If an electrician isn’t available, set it to 6A for each charger for safety, since a higher value could risk overloading your panel

  • Individual Charger Limits: Each charger maintains its maximum charge rate setting, which PowerSmart will not exceed even when capacity is available.

  • Dynamic Distribution: When multiple EVs are charging, available power is automatically distributed based on:

    • Equal sharing among chargers with the same service rating

    • Proportional allocation based on individual charger ratings

    • Real-time adjustments as vehicles complete charging or are plugged in

System Requirements for Multi-EVSE

  • All chargers must have PowerSmart capability or an upgrade

  • A single Vue energy monitor can manage multiple chargers

  • The electrical panel must have sufficient total capacity for the minimum charging requirements (6A per charger minimum)

  • All chargers must be on the same electrical panel being monitored

Important: How PowerSmart Affects Other Emporia Features

PowerSmart prioritizes electrical safety and will override other energy management features when necessary:

  • Manual charge rate adjustments are disabled while PowerSmart is active

  • Schedules (Time of Use) are respected, but PowerSmart may reduce rates during scheduled charging to maintain safe capacity

  • Peak Demand Management is overridden by PowerSmart for safety reasons

  • Excess Solar Management works in complement to PowerSmart without interference


Frequently Asked Questions

What happens if the Minimum Guaranteed Charge Rate is set too high?

If it's set higher than what your electrical panel can handle, your charger will keep drawing that amount even when your home is using a lot of power, which can overload your panel.

Why am I getting a “Minimum Guaranteed Charge Rate Too High” error message when saving my PowerSmart settings?

If a red banner titled “Minimum Guaranteed Charge Rate Too High” appears at the top of the PowerSmart screen, above your settings, it means the Minimum Guaranteed Charge Rate you entered is the same as or higher than your charger’s max charge rate, which is set by your breaker size. The minimum needs to be lower than that. This typically happens when you enter your breaker size as the Minimum Guaranteed Charge Rate. Your breaker size is already set during onboarding and sets your charger’s max charge rate. The Minimum Guaranteed Charge Rate sets the minimum, based on the amperage your panel has available for EV charging, as determined by a licensed electrician. PowerSmart adjusts between the two to prevent overloading. Ask your electrician how much amperage your panel can spare for EV charging, and enter that number. If an electrician isn’t available, set it to 6A for safety, since a higher value could risk overloading your panel.

Why am I unable to save and getting an error on the Minimum Guaranteed Charge Rate field?

If red text appears directly under the Minimum Guaranteed Charge Rate field and says “Minimum value is” followed by a number, the rate you entered is lower than the minimum PowerSmart allows. That minimum is 6A for each charger in your PowerSmart setup, so 6 for one charger, 12 for two, and so on. The number in the error is that minimum. Enter that amount or higher, using what your electrician determined your panel can spare. If an electrician isn’t available, enter the minimum shown in the error.

What is the PIN I’m asked for when I try to save PowerSmart settings?

The PIN is a 4-digit code created during onboarding, at the breaker size step, which sets your charger’s max charge rate. It locks safety-related settings, including breaker size and PowerSmart, so they aren’t changed by accident. Whoever set up your charger chose the PIN. If an electrician installed it, contact them. If you set it up yourself and don’t remember it, contact Emporia Energy Support.

Can I manually adjust the charge rate while PowerSmart is active?

No, manual charge rate adjustment is disabled while PowerSmart is active to maintain safe limits based on real-time service load. PowerSmart automatically optimizes your charging rate.

Why can't I move my charger or monitor to a different Home?

The move would split your PowerSmart setup across Homes, which the app blocks. Disable PowerSmart or remove the device from it first, or move the monitor and all of its controlled chargers to the same Home together.

For more information about PowerSmart, including how it works, cost savings, and feature limitations, see our main PowerSmart article.


Feedback and suggestions

Emporia is committed to helping you get the most out of your energy management products. If you have questions or need assistance with PowerSmart, please contact our Customer Support team.

Did this answer your question?