Reset WiFi / Solar Setup

The WiFi reset for the Gen 2 is a bit different from the other devices. As part of this reset process, the Gen 2 will also have the ability to re-calibrate itself based on the voltage and current measured by the device during the reset process. General information about running a WiFi reset itself can be found here. If you're running the reset process as a way to re-calibrate the device, you'll want to make sure you have any solar/generation turned off and a decent consumption load running during the reset. This will help the Gen 2 automatically calibrate itself correctly based on the highest consumption values it can detect as part of its scanning and calibration process.

Feedback and Suggestions

This knowledge base is pretty new for the Emporia team. Our goal is to provide all of the information we can to help you manage your energy in better ways. If this article wasn't helpful, or we could be more clarifying on any points please reach out to the Customer Support team and we'll certainly work to improve these guides.