All Collections
Vue: Gen 2
Setup and Installation
Can I use the 200A CT's on circuits other than mains?
Can I use the 200A CT's on circuits other than mains?
Kevin Wanek avatar
Written by Kevin Wanek
Updated over a week ago

Yes - the measurements themselves should still be accurate, but two points to note regarding the 200A CT/top port behavior:

1.) All sensors plugged into the top ports are combined in the app as Total (or Net) usage. There is no option to separate the sensors within the app at the moment.
2.) We calculate percentages and Balance based on the Total (Net) Usage number - so if the 200A CT's are not monitoring the upstream mains from the other 50A CT's, then Balance and percentages will have drastically inaccurate numbers because of the assumed configuration. Measurements should still be accurate however.

Feedback and Suggestions

This knowledge base is pretty new for the Emporia team. Our goal is to provide all of the information we can to help you manage your energy in better ways. If this article wasn't helpful, or we could be more clarifying on any points please reach out to the Customer Support team and we'll certainly work to improve these guides.

Did this answer your question?