Solar Monitoring
Kevin Wanek avatar
Written by Kevin Wanek
Updated over a week ago

Solar Generation can be monitored very similarly to some of our other circuits. We have built a supplemental installation guide specifically for monitoring solar installations with a Gen 2 device. Your first step should be to take a look here:

The Gen 2 Vue Solar Supplement guide will outline the proper sensor placement as well as any required tips for properly monitoring generation. If you have any additional questions, feel free to reach out to the Emporia Support team and they will be able to help answer them.

Common questions about solar monitoring:

1.) Does the solar 50A CT have to be reversed? Yes - compared to the default installation of the 50A CT, you will want the "K" on the bottom of any solar circuit CT's pointing towards the solar inverter, "L" in towards system breakers. This is because the direction of power supply is reversed.

2.) Can the CT measure the DC side of the solar inverter? No - CT's will only work on AC circuit lines.

That's how the app will show energy generation and consumption:


Feedback and Suggestions

This knowledge base is pretty new for the Emporia team. Our goal is to provide all of the information we can to help you manage your energy in better ways. If this article wasn't helpful, or we could be more clarifying on any points please reach out to the Customer Support team and we'll certainly work to improve these guides.

Did this answer your question?